Custom abrasive conversion · Malaysia
Custom coated abrasive conversion built around your process.
Citra Oasis converts selected coated abrasive material into purpose-sized belts, rolls, discs and sheets, with specification guidance based on the workpiece, equipment and required finish.
Four abrasive formats, one specification-led process.
Customisation begins with the application. Product construction, grit and dimensions must work together rather than being selected independently.
Sanding belts
Wide, narrow and portable belt dimensions with construction and joint selection based on machine operation.
Explore sanding belts → 02Abrasive rolls
Paper- and cloth-backed rolls in common or customised widths and confirmed lengths.
Explore abrasive rolls → 03Sanding discs
Custom diameter, PSA or Velcro attachment and specified dust-extraction hole patterns.
Explore sanding discs → 04Sandpaper sheets
Standard 230 × 280 mm sheets or purpose-cut sizes within the selected abrasive range.
Explore sandpaper sheets →Quotation checklist
Prepare a complete conversion specification.
These details help confirm whether the selected abrasive construction can be converted into the requested format.
Understand abrasive construction →Specify belt, roll, disc, sheet or another required coated-abrasive format.
Provide width and length, belt circumference, disc diameter or finished sheet dimensions in millimetres.
Name the machine, backing pad, hand block or process in which the abrasive will be used.
State the material, coating, removal requirement, next operation and finish target.
Share the required P grit and current abrasive product, grain or backing if known.
For discs, confirm PSA or Velcro and the hole pattern. Include the required quantity for every format.
From coated abrasive roll to finished format.
The exact conversion steps vary by format and material. This sequence shows how selected abrasive material is prepared as a finished belt.
Choose an available abrasive construction suited to the application.
Prepare the material for the specified dimensions and format.
Complete the required belt joint or other format-specific preparation.
Complete the converted format for checking, packing and supply.
Custom dimensions remain subject to the selected abrasive construction, grit, source material width and format requirements. Evaluate a new specification through a controlled trial before wider production use.
Common customisation decisions.
Each finished format has different compatibility details that must be resolved before conversion.
| Format | Key dimensions | Other decisions |
|---|---|---|
| Sanding belt | Width × full belt length | Machine, backing, grain, grit and suitable joint |
| Abrasive roll | Roll width and length | Paper or cloth backing, hand, machine or further conversion use |
| Sanding disc | Diameter | PSA or Velcro attachment, no holes or specified extraction pattern |
| Sandpaper sheet | Width × length | Waterproof or dry sanding construction and cutting requirement |
Custom abrasive conversion FAQ.
A complete specification makes feasibility checks and sample evaluation more useful.
Which abrasive formats can be customised?
Citra Oasis can supply custom-size sanding belts, abrasive rolls, sanding discs and sandpaper sheets, subject to abrasive construction, grit and material availability.
What information is needed for a custom abrasive quotation?
Provide the required format and dimensions, workpiece, machine or sanding method, P grit, attachment or hole pattern where relevant, current abrasive if known, quantity and required result.
Can PSA and Velcro sanding discs be customised?
Yes. Disc diameter, PSA or hook-and-loop attachment and dust-extraction hole pattern can be customised subject to the selected abrasive and availability.
Should a custom specification be trialled?
Yes. Abrasive performance depends on the full process, so a controlled evaluation is recommended before wider production use.
Send us your custom abrasive specification.
Include format, dimensions, machine, workpiece, P grit, attachment or hole pattern, current product, quantity and required result.